Mainly used in deep sea trolling, outriggers are a pair of long poles fitted on both sides of a boat that holds fishing lines away from the boat. It is usually made of fiberglass and aluminum, and is tilted at an angle between 70 to 80 degrees.
When being used, outriggers are lowered to an angle nearly the same level as the water’s surface. At the edge of each outrigger is a pulley with a cord, attached to which is a quick release clip that holds the fishing line. Once a fish strikes, the line is released so that it can be landed with the use of the traditional rod and reel.
Generally, outriggers improve the chances of a fish striking because not only does it allow the angler to cover more ocean space, it also permits the use of multiple lines. Because outriggers allow the use of multiple rods and reels, anglers can troll as many fishing lines as it may allow, thus, simulating a school of bait fish. It also allows the leader out of the water, thus, preventing bubbles that may scare the fish away.
Outriggers also hold the fishing lines at a distance from both sides of the boat, spreading the lines far enough to prevent the risk of tangling. With more lines in the water, the angler can set them at different distances and depths that can create a variety of natural patterns to increase the chances of a strike.
The shallow, rocky reefs are also home to many fish species, however, trolling in these grounds are dangerous. With the use of outriggers, the fishing boat can stay in the safe deeper water while the lures are positioned to graze the shallow waters.
When trying to land that trophy marlin or, if you are ambitious enough, a thousand-pounder, you need all the information and help that you could find. When trying to catch the marlin of your dreams, try using these lures.
1. Mold Craft Wide Range
What is so great about the Mold Craft Wide Range is that it can be used in a wide range (thus its name) of conditions and speed. Thus, it is a favorite among anglers who want to land the big fish because it can be used in rough waters. This feature is accomplished by the center hole and squared-off nose.
2. Pakula Lumo Sprocket
The Pakula Lumo Sprocket was designed mostly as a straight runner and has a very tight swimming action. Lures by Pakula were first marketed in Hawaii for many years before these were sold in Australia, then, and the rest of the world.
3. Mold Craft Super Chugger
One of the lures you really must have, the Mold Craft Super Chugger has a concave face that enables it to grab a gulp of air which it then lets out in a thick bubble stream. This lure also moves in a side-to-side wiggle so that it resembles the swimming movement of fish.
4. Joe Yee Super Plunger
The Joe Yee Super Plunger is among the most popular and most widely used plungers, worldwide. A favorite by many anglers, these lures have caught their fair share of thousand-pound marlins.
5. Marlin Magic Ruckus
Another favorite among anglers, the Marlin Magic Ruckus is among the most productive lures used for catching marlin.
Marlin is a prized game fish, mostly because it offers a big challenge to the angler as it fights long and hard.
1. By Peter Ganz
The Atlantic Blue Marlin caught by JPeter Ganz was estimated to be 1,400 lb. It was caught off the waters of the islands of Azores, a Portuguese archipelago – near the Faial Island. This fish was not hauled in but was tagged, revived, and released back to the waters. For sure, this fish is among the largest caught.
2. By Jacky Delbrel
Jacky Delbrel caught a 1,189 lb Atlantic blue marlin, again in the part of the Atlantic Ocean in Azores, near the island of Faial. This catch holds the IGFA 80-pound world record for Atlantic Blue Marlin.
3. By Jean-Paul Richard
A 1,157-lb Atlantic marlin was caught by Jean-Paul Richard in Madeira. Caught along with this thousand-pounder was slightly smaller thousand-pounder weighing 1,028 lbs.
4. By Jack Harrington
It was in June 26, 1974 that the first thousand-pounder marlin was caught off the Oregon Inlet by Jack Harrington. Among the largest caught to date, this is worth mentioning especially since not too many thousand pounders have been caught. This marlin weighed 1,142 lb.
5. By Tracy Melton
Tracy Melton caught an Atlantic marlin weighing 1,083 lbs in Madeira. It was caught with an 80-pound tackle.
Of course, there are also plenty of marlins caught that are not listed here but could be heavier than these. There are also talks of fish weighing as much as 2,000 lbs which were almost caught.
Florida Bill Fish- the Marlin, Sailfish, Sword Fish, Spear Fish and Saw Fish
In fishing, it is extremely important for anglers to know what types of fish there are in a certain location, like Florida. While tuna is one of the most abundant species in Florida, there is also another species of fish that thrives in the Florida waters just as much. These other species are known as bill fish.
Bill fish is a common term applied to large predatory fish that are known for typically being large in size with long sword-like bills. Some of the most popular bill fish that have been identified include sailfish and marlin. In addition, these species can be found in the migratory, pelagic, and all oceans.
In Florida, however, there are specific species that are found in abundance in its waters. Some of the bill fish found in Florida includes the following:
Sailfish –is a bill fish that is blue to grey in color and has an erectile dorsal fin which stands for its sail.
Blue marlin – also known as the Atlantic blue marlin, is a popular game fish and has high fat content.
White marlin – is an elongated fish with an upper jaw that forms a spear and has dark blue to chocolate-brown color.
Striped marlin – a species of marlin known to be one of the biggest game fish, weighing at 190 kg.
While there are other fishes that are also found in Florida, a number of anglers travel to Florida for a chance to catch bill fish since these fishes are sometimes deemed a bit aggressive and hard to capture making it more challenging for them. To catch a billfish is one of those memorable moments in an angler’s record that beats capturing the often common snappers.
Come explore a iOutdoor Fishing Adventure on your next visit to Florida setting kite on your favorite offshore species!
Catch and Release! Save the day for other Marlin fisherman to come! There is more to fishing that anglers should be and must be aware of. For those who do not yet know, recreational fishing has made a great impact on the fish population and their habitat. This impact has caused a decline of several fish species and is a problem that needs to be addressed immediately. One of the best ways to answer this problem is through the observation of conservation techniques when fishing.
Conservation Techniques:
Handle your boat properly while on the water. Fishing and boating always go together. No fishing can occur without the aid of a boat. However, when fishing in shallow waters, a boat can cause huge damage to a fish habitat. It can chop up underwater vegetation and stir up sediments that can affect aquatic vegetation.
Fishing gear, especially lost or abandoned ones can harm fish and other underwater creatures. Lost sinkers made of lead can be toxic when mistaken for food and swallowed. Discarded fishing lines can cause strangulation or starvation when accidentally swallowed for food or tangled up with an underwater creature’s body part.
Resist dumping garbage and other belongings in the water. Dirty water is poisonous and can risk underwater wildlife. Remember, whatever fish eat, you end up eating too.
Always think about the possible invasion of non-native plants or species in your local fishing spot. Before heading home, make sure to rinse off your gear and shoes. Do not use live bait if it is prohibited and do not dump extra and unused bait into the water if it is prohibited. This can cause competition between native and non-native species. In some cases, non-natives have outnumbered native species because of these habits.
When catching and releasing, make it an effort to handle your catch gently and carefully. Many fish that have been caught and released end up dying because of improper handling.
Mainly used in deep sea trolling, outriggers are a pair of long poles fitted on both sides of a boat that holds fishing lines away from the boat. It is usually made of fiberglass and aluminum, and is tilted at an angle between 70 to 80 degrees.
1. Mold Craft Wide Range
